Carburetor Intake Manifold Boots for Honda VT600 VT750 Transalp NT650

Product Overview

Restore a secure and properly sealed connection between the carburetors and engine with this two-piece carburetor intake manifold boot set, designed for compatible Honda Shadow, Transalp, Hawk GT, Deauville, and Revere motorcycles.

Made from durable rubber, these intake insulators replace original boots that have become hardened, cracked, loose, or difficult to seal after prolonged exposure to engine heat, vibration, fuel vapor, and age.

Damaged intake boots can allow unmetered air to enter the engine, potentially causing unstable idle, hanging RPM, hesitation, difficult starting, uneven running, or a lean air-fuel condition.

This aftermarket set is commonly cross-referenced with Honda intake-insulator numbers 16211-MS8-000, 16211-MAW-600, 16210-MZ6-760, and 16211-MN8-750. Because Honda used different intake-boot arrangements across these model families, compare the OEM number, dimensions, shape, and product photos before ordering.

Product Compatibility

Honda VT600 Shadow Fitment

Brand	Model	Model Code	Year Range	Fitment Notes
Honda	Shadow VLX 600	VT600C	1988–2007	Verify original intake boot and OEM number
Honda	Shadow VLX Deluxe	VT600CD	1993–2007	Confirm carburetor-side and engine-side diameters

OEM parts listings confirm that 16211-MAW-600 replaces the earlier 16211-MS8-000 on compatible VT600 applications.

Honda VT750 Shadow Fitment

Brand	Model	Model Code	Year Range	Fitment Notes
Honda	Shadow ACE 750	VT750C / VT750CD	Selected 1997–2003 models	Verify exact trim and OEM number
Honda	Shadow ACE Deluxe	VT750CD	1998–2003	Compare intake-boot configuration
Honda	Shadow Spirit 750	VT750DC	2001–2003, 2005–2007	Verify regional model year
Honda	Black Widow 750	VT750DC / RC48A / RC48B	2000–2003	European-market designation
Honda	Shadow Aero 750	VT750C2 / RC44	Selected 1997–2002 models	Confirm carbureted configuration

Honda parts fitment listings associate 16211-MAW-600 with selected VT750 ACE, ACE Deluxe, and Shadow Spirit applications.

Honda Transalp Fitment

Brand	Model	Model Code	Year Range	Fitment Notes
Honda	XL600V Transalp	XL600V / XLV600	1987–2000	Verify exact production market
Honda	XL650V Transalp	XL650V / XLV650	2000–2007	Confirm original boot shape and dimensions

Honda NT and NTV Fitment

Brand	Model	Model Code	Year Range	Fitment Notes
Honda	Hawk GT 650	NT650 / RC31	1988–1991	Commonly associated with 16211-MN8-750
Honda	Deauville 650	NT650V / RC47	1998–2005	Uses model-specific front/rear intake references
Honda	Revere 600	NTV600	1988–1991	Verify original manifold dimensions
Honda	Revere 650	NTV650 / RC33	1988–1997	Confirm exact OEM numbers

The NT650 Hawk GT parts diagram identifies 16211-MN8-750 as the carburetor insulator. NT650V parts documentation lists both 16210-MZ6-760 and 16211-MN8-750 within the intake assemblies.

Model years, model codes, and intake configurations may vary by country. Use the OEM numbers and physical specifications as the final fitment references.

OEM Cross-Reference Numbers

Honda References

• 16211-MS8-000
• 16211MS8000
• 16211-MAW-600
• 16211MAW600
• 16210-MZ6-760
• 16210MZ6760
• 16211-MN8-750
• 16211MN8750

OEM Number Notes

• 16211-MAW-600 supersedes or replaces 16211-MS8-000 on compatible Honda applications.
• 16210-MZ6-760 and 16211-MN8-750 are separate Honda intake-insulator references used on certain NT650, NT650V, NTV650, and related applications.
• The four numbers should not be presented as one single Honda supersession chain.

Your original motorcycle does not need to display all four numbers. At least one applicable OEM reference should match, and the complete physical configuration must also be compared.

Specifications

Specification	Details
Product Type	Carburetor Intake Manifold Boot Set
Alternative Names	Carburetor Insulator / Intake Joint / Carb Holder
Application	Carburetor-to-Engine Intake Connection
Material	Rubber
Color	Black
Intake Passage	Approximately 32 mm / 1.26 in
Carburetor-Side Inner Diameter	Approximately 39–40 mm / 1.54–1.57 in
Engine-Side Inner Diameter	Approximately 39–40 mm / 1.54–1.57 in
Applicable Clamp Range	27–35 mm / 1.06–1.38 in
Clamp Band Width	8 mm / 0.31 in
Shape	Straight
Fitment Type	Direct Replacement
Vehicle Type	Motorcycle
Condition	New
Package Quantity	2 Intake Manifold Boots

The supplied clamp range has been converted more accurately: 27 mm equals approximately 1.06 inches, while 35 mm equals approximately 1.38 inches.

The dimensions listed by different aftermarket manufacturers may vary slightly depending on the measuring location. Compare the measurement points shown in the product images with the original parts.

Key Features

• Broad Honda V-Twin Fitment: Designed for compatible VT600, VT750, XL600V, XL650V, NT650, and NTV650 carbureted motorcycles.
• Helps Prevent Vacuum Leaks: Restores a sealed connection between the carburetors and engine intake ports.
• Durable Rubber Construction: Designed to resist normal engine heat, vibration, fuel vapor, and age-related deterioration.
• Replaces Hardened or Cracked Boots: Suitable for repairing loose, brittle, split, or distorted intake connections.
• Two-Piece Replacement Set: Provides one pair of intake manifold boots for compatible two-cylinder applications.